ROWELD SANILINE 40-160mm, Special Edition 230V
Manual sanitary plastic pipe welding machine Ø 40-160 mm
- High stability due to optimized force distribution
- All common sanitary installation fittings can be clamped.
- Flexible use in difficult positions caused by removable heating plates.
- Minimized drag force.
- Precise force adjustment.
- Protection against unintentional starting and derailing of the trimmer unit.
- Secure clamping of pipes, fittings, tight 45° branches and 90° bends.
Izvēlēties variantu
Pirkt tiešsaistē
Atrodiet tuvāko izplatītāju
Lūdzu, izvēlieties izplatītāju, izmantojot
Produkta apraksts
The P160 Saniline is ideal for the installer. Due to the compact design, she can be stored in each vehicle. The heating element has an electronic temperature control (DVS compliant) and can be used separately if necessary.
Funkcijas un funkcijas
230 V AC
115 V AC
110 V AC
Mobile use
ROCASE case system
DURAMANT Technology
Piegādes joma
- Saniline P160 bare tool + milling device
- Heating element kit D 200 mm
- Upper reduction 125 mm
- Reduction bottom 125 mm
- Top reduction 110 mm
- Lower reduction 110 mm
- Reduction top 90 mm
- Reduction at bottom 90 mm
- Reduction at top 75 mm
- Reduction at bottom 75 mm
- Reduction at top 63 mm
- Reduction at bottom 63 mm
- Reduction at top 50 mm
- Reduction at bottom 50 mm
- Reduction at top 40 mm
- Reduction at bottom 40 mm
- Open-end wrench SW 17
- Operating instructions P160 A4
- Welding table booklet P160 A4
- Data disc P110 - P250
- Support fork set d 40 / 125 mm
- Support fork set d 50 / 110 mm
- Support fork set d 56 / 90 mm
- Support fork set d 63 / 75 mm
Tehniskie dati
Svarīgākie fakti īsumā
| Ieejas jauda (min-maks) | 0 – 1,850 W |
| Spriegums (min-maks) | 230 V |
| Darba zonas diametrs mm (min-maks) | 40 - 160 mm |
| Darba zona Temperatūra (min-maks) | 160 – 285 °C |
| Piemēroti materiāli | , PE, PP, PVDF, Formteile |
| Strāvas padeves spraudņa tips | Plug type C (CEE 7/16) |
| Tīkla frekvence ar mērvienību | 50 Hz |